Search
Get in Touch

Tag: Repair

Projects

How To Replace Stripped Servo Gears – Example Done On Turnigy TG9e

If you've ever used servos, particularly micro servos for RC or robotics projects then you've likely encountered...
Michael Klements -
Read
Hacks

How To Replace An iPhone 6 Battery

Here’s a full guide to replacing the battery in an iPhone 6. This works for batteries which...
Michael Klements -
Read
Projects

How To Give Some Old Chairs A Makeover

Do you have some old chairs lying around in your attic, garage or basement? Give them a...
Michael Klements -
Read
Hacks

How To Repair A Chip In Your Windshield

If you have a chip in your windshield, it is necessary that you get it repaired as...
Michael Klements -
Read
Projects

How To Replace or Upgrade A Drill Chuck, Step By Step

A drill's chuck works hard, especially on a impact drill, so it's no surprise that they do...
Michael Klements -
Read
Hacks

Temporarily Stop The Annoying Sound Of A Dripping Tap

When the tap in the bathroom starts dripping at night and is making it impossible to sleep,...
Michael Klements -
Read
Hacks

Super Glue Hack, Strengthen Your Repairs

Super glue is a really versatile and useful product, perfect for a quick fix. It's only downfall...
Michael Klements -
Read
Repairs

Repair A Leaking Plumbing Pipe Yourself, No Experience Required

Household plumbing pipes are installed in the walls and underneath the floor during construction. They carry fresh...
Michael Klements -
Read

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

Gweike G2 Pro 30W Fibre Laser Unboxing & Review

Michael Klements - 0
I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with a 3D printer, they've been fantastic for...

Khadas Mind 2 Unboxing & Review

Michael Klements - 0
Over the past two years, I've tried two of Khadas' single board computers which were aimed at being compact and low power computers for...

Elegoo Mars 5 Ultra Unboxing and Review

Michael Klements - 0
The Mars 5 Ultra is the latest revision to Elegoo's successful Mars series of SLA printers. Its product page advertises an impressive set of...

Most Popular

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - 24
Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Multiple Push Buttons on One Arduino Input

Michael Klements - 29
The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - 146
Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

Fast Access

© The DIY Life | All rights reserved |