Search
Get in Touch

Tag: laser engraver

Life In General

Ortur Laser Master 2 Pro Unboxing and Review

Today we’re going to be taking a look at the Ortur Laser Master 2 Pro which the...
Michael Klements -
Read
K40 Laser Modifications

How To Add A Radial Fan Air Assist System To A K40 Laser Cutter

I've seen quite a few people have added an air assist system to their K40 laser cutters...
Michael Klements -
Read
K40 Laser Modifications

How To Add A Red Dot Pointer To A K40 Laser Cutter

If you’ve used a stock k40 laser cutter, then you’ll know that positioning the laser for a...
Michael Klements -
Read

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

Gweike G2 Pro 30W Fibre Laser Unboxing & Review

Michael Klements - 0
I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with a 3D printer, they've been fantastic for...

Khadas Mind 2 Unboxing & Review

Michael Klements - 0
Over the past two years, I've tried two of Khadas' single board computers which were aimed at being compact and low power computers for...

Elegoo Mars 5 Ultra Unboxing and Review

Michael Klements - 0
The Mars 5 Ultra is the latest revision to Elegoo's successful Mars series of SLA printers. Its product page advertises an impressive set of...

Most Popular

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - 24
Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Multiple Push Buttons on One Arduino Input

Michael Klements - 29
The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - 146
Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

Fast Access

© The DIY Life | All rights reserved |