Search
Get in Touch
HomeLife In General

Life In General

View Category
Laser Cutting

Gweike G2 Pro 30W Fibre Laser Unboxing & Review

I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with...
Michael Klements -
Read
Electronics Projects

Khadas Mind 2 Unboxing & Review

Over the past two years, I've tried two of Khadas' single board computers which were aimed at...
Michael Klements -
Read
3D Printing

Elegoo Mars 5 Ultra Unboxing and Review

The Mars 5 Ultra is the latest revision to Elegoo's successful Mars series of SLA printers. Its...
Michael Klements -
Read
Life In General

LincStation N1 All-SSD NAS by LincPlus, Unboxing & Review

Today we're going to be taking a look at the LincStation N1, a 6-bay all-SSD NAS by...
Michael Klements -
Read
Electronics Projects

I Tried 3 New Hats For The Raspberry Pi 5

Today we've got three new hats for the Raspberry Pi 5 that we will be trying out....
Michael Klements -
Read
Electronics Projects

Beelink EX Docking Station For The GTi 14 Ultra

A couple of weeks ago, I tested the Beelink GTi 14 Ultra, a powerful mini PC with...
Michael Klements -
Read
Electronics Projects

I Tried The New TerraMaster F8 SSD Plus, Is It Any Good?

A few months ago I built an all-SSD NAS using a Raspberry Pi 5 and a quad-SATA...
Michael Klements -
Read
Electronics Projects

I Tried The ZimaCube Pro, Is This The Perfect Home Server?

Today we’re going to be taking a look at the ZimaCube Pro. This is a new device...
Michael Klements -
Read

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

Raspberry Pi 5 Case With An Integrated Water-Cooling Loop

Michael Klements - 1
A while back, I built a water-cooled Raspberry Pi 4 computer using a Pi CM4 module and the official IO board. This computer and...

Add an OLED Stats Display to Raspberry Pi OS Bookworm

Michael Klements - 7
Raspberry Pi OS Bookworm has been out for a little over a year now. It comes with a few visual changes like a Wayland...

Gweike G2 Pro 30W Fibre Laser Unboxing & Review

Michael Klements - 0
I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with a 3D printer, they've been fantastic for...

Most Popular

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - 26
Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Arduino Based Obstacle Avoiding Robot Car

Michael Klements - 73
In this guide, I’ll be showing you how to build your own Arduino based obstacle avoiding robot car. The car uses a servo mounted...

Multiple Push Buttons on One Arduino Input

Michael Klements - 29
The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

Fast Access

© The DIY Life | All rights reserved |