Search
Get in Touch

Tag: laser cutting

3D Printing

I Made A Pico ITX Case For My Rock 5 Model B

Following on from my initial review of the Rock 5 Model B, I eventually managed to get...
Michael Klements -
Read
Laser Cutting

Atomstack X30 Pro Unboxing & Testing

Atomstack has recently launched the X30 Pro. This is their new flagship gantry-style laser engraving and cutting...
Michael Klements -
Read
3D Printing

I 3D Printed A Raspberry Pi Case That AI Designed

I've recently watched a few videos where people have been experimenting with Dream Studio's AI image generator....
Michael Klements -
Read
Electronics Projects

I Made An Only Fans Case For My Raspberry Pi

Every time I've made a new case for my Raspberry Pi, there are always a few comments...
Michael Klements -
Read
3D Printing

My Raspberry Pi Case Now Has An M.2 SSD, and It’s Way Faster!

I've been using one of my Raspberry Pis in my case with a wrap-around acrylic panel for...
Michael Klements -
Read
Electronics Projects

Acrylic Pi Cases, Gweike Cloud Review – Can It Compete With The Glowforge?

If you've seen some of my other projects, I often use my K40 laser cutter to cut...
Michael Klements -
Read
Electronics Projects

How To Design A Pi Case For Laser Cutting – In Depth Tutorial

The last couple of times I’ve done a project involving a laser-cut Pi case, people have asked...
Michael Klements -
Read
Electronics Projects

Making Laser Cut Raspberry Pi Cases Using The Atomstack X7 40W

Today we’re going to design and laser cut some new Raspberry Pi cases from 3mm plywood using...
Michael Klements -
Read

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

Gweike G2 Pro 30W Fibre Laser Unboxing & Review

Michael Klements - 0
I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with a 3D printer, they've been fantastic for...

Khadas Mind 2 Unboxing & Review

Michael Klements - 0
Over the past two years, I've tried two of Khadas' single board computers which were aimed at being compact and low power computers for...

Elegoo Mars 5 Ultra Unboxing and Review

Michael Klements - 0
The Mars 5 Ultra is the latest revision to Elegoo's successful Mars series of SLA printers. Its product page advertises an impressive set of...

Most Popular

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - 24
Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Multiple Push Buttons on One Arduino Input

Michael Klements - 29
The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - 146
Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

Fast Access

© The DIY Life | All rights reserved |