Search
Get in Touch
Home Second Version Of Hotend Mounted Onto Extrusions Second Version Of Hotend Mounted Onto Extrusions

Second Version Of Hotend Mounted Onto Extrusions

Second Version Of Hotend Mounted Onto Extrusions
Hotend Held In Place With Nuts
Second Version Of Hotend Holder

The best resource for tech and electronics projects, tutorials and reviews

Latest Posts

I Tried The New TerraMaster F8 SSD Plus, Is It Any Good?

Michael Klements - 0
A few months ago I built an all-SSD NAS using a Raspberry Pi 5 and a quad-SATA hat from Radxa. By adding a 2.5Gb...

I Tried The ZimaCube Pro, Is This The Perfect Home Server?

Michael Klements - 0
Today we’re going to be taking a look at the ZimaCube Pro. This is a new device from IceWhale, the company that have already...

Personal Cloud Server Using A Pi 5 – Made With The Omtech Polar

Michael Klements - 2
The cost of cloud services might not be that significant for one month, but the recurring costs quickly stack up. In a couple of...

Most Popular

I Built A 4-Bay Raspberry Pi 5 Based NAS

Michael Klements - 21
Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Recondition a Lead Acid Battery, Don’t Buy A New One

Michael Klements - 146
Lead acid batteries often die due to an accumulation of lead sulphate crystals on the plates inside the battery, fortunately, you can recondition your...

Multiple Push Buttons on One Arduino Input

Michael Klements - 29
The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

Fast Access

© The DIY Life | All rights reserved |