G2 Pro Fibre Laser Can't Engrave Wood

The best resource for tech and electronics projects, tutorials and reviews

Michael Klements - November 27, 2024 0

Raspberry Pi OS Bookworm has been out for a little over a year now. It comes with a few visual changes like a Wayland...

Michael Klements - November 13, 2024 0

I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with a 3D printer, they've been fantastic for...

Michael Klements - October 31, 2024 0

Over the past two years, I've tried two of Khadas' single board computers which were aimed at being compact and low power computers for...

Michael Klements - May 15, 2024 24

Last year, I built a Pi-based NAS as cheaply as possible using a Raspberry Pi Zero 2W. It was a great project to learn...

Michael Klements - July 13, 2020 73

In this guide, I’ll be showing you how to build your own Arduino based obstacle avoiding robot car. The car uses a servo mounted...

Michael Klements - May 17, 2019 29

The most commonly used Arduino board, the Arduino Uno, only has 12 available digital IO pins, so you may find yourself quickly running out...

G2 Pro Fibre Laser Can’t Engrave Wood