How To Replace The Front Camera On An iPhone 6

Has your front facing camera on your iPhone 6 been giving trouble or is not working at all? Does your proximity sensor not turn off the touch screen when you raise your ear to your iPhone, causing unwanted popups during calls? Does you earpiece speaker not work or work intermittently? If you’ve got any of these problems then you’ll want to replace the front camera and sensor assembly on your iPhone 6. It’s a really easy repair to carry out yourself, it takes about 15 to 30 minutes to carry out and it costs between $6 and $12. It’s really worthwhile to get your old iPhone working and usable again.

The guide below will take you through the process of replacing the front facing camera and sensor assembly step by step.

If you’ve got other problems with you iPhone 6, have a look at these guides:

What You’ll Need To Replace Your iPhone 6 Front Camera & Sensor Assembly

  • Your Damaged iPhone 6
  • Replacement iPhone 6 Front Camera Assembly Cheap – Buy Here
  • Replacement iPhone 6 Front Camera Assembly Good Quality – Buy Here
  • Replacement iPhone 6 Front Camera Assembly With Toolkit – Buy Here
  • Premium Tool Kit Only – Buy Here
  • Cheap Tool Kit Only – Buy Here

How To Replace The Front Camera & Sensor Assembly

Find yourself a nice flat and well lit area to work on. You’ll need an area to lay down the screws you have removed. I like to keep a small sheet of paper nearby and lay the screws I’ve removed down on the paper and mark off where they were removed from. There are a number of different sized screws on the cover plates and it’s important that you put them back in the correct places.

The two most important parts of this repair are to keep your screws really well organised so that you know exactly which one came out of where and to be careful when working with the ribbon cables, especially when opening up your phone, they are extremely fragile.

If you enjoyed this guide, have a look at these other iPhone repairs you can do yourself. Most iPhone repairs can be done at home for a few dollars, so don’t replace your iPhone until you’ve had a look at whether you can repair it at home first.

Good luck with your repairs and let me know how it went in the comments section below.

Michael Klements
Michael Klements
Hi, my name is Michael and I started this blog in 2016 to share my DIY journey with you. I love tinkering with electronics, making, fixing, and building - I'm always looking for new projects and exciting DIY ideas. If you do too, grab a cup of coffee and settle in, I'm happy to have you here.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest posts

Gweike G2 Pro 30W Fibre Laser Unboxing & Review

I've been using diode and CO2 lasers in my home workshop for quite some time. Combined with a 3D printer, they've been fantastic for...

Khadas Mind 2 Unboxing & Review

Over the past two years, I've tried two of Khadas' single board computers which were aimed at being compact and low power computers for...

Elegoo Mars 5 Ultra Unboxing and Review

The Mars 5 Ultra is the latest revision to Elegoo's successful Mars series of SLA printers. Its product page advertises an impressive set of...

Related posts